+
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
  • Vape Kits - Kanger EVOD Pro Starter Kit
Kanger EVOD Pro Starter Kit Video

Kanger EVOD Pro Starter Kit

SKU: ka-evod-bl-pro   
Kanger
19.99 24.99
In Stock
Earn 40 Points


BATTERIES ARE NOT INCLUDED

Recommended products with your purchase:
Tech:
Passthrough Kanger EVOD Pro Starter Kit External Cell Kanger EVOD Pro Starter Kit Top Filling Kanger EVOD Pro Starter Kit

Kanger EVOD Pro Starter Kit Overview

The EVOD PRO Starter Kit is Kanger’s newest contribution to the lengthy line of EVOD devices. Unlike the original EVOD or the EVOD 2, the EVOD PRO vape pen is powered by a single 18650 battery (not included). No more waiting for a depleted internal battery to charge before you can start vaping again; simply swap the dead battery with a fully charged battery and start vaping instantly. Similar to the popular eGo style vaporizers, the EVOD PRO offers a compact all-in-one design that boasts a massive 4mL E-Juice capacity. The EVOD PRO atomizer is compatible with an extensive line of Kanger’s top-notch CLOCC atomizer heads. The tank supports a top-filling cup-style construction, allowing the user to fill the tank as they would a glass of water: effortlessly. The EVOD PRO presents a single operational button for firing and offers a MicroUSB port for charging. Vape confidently knowing that Kanger included short circuit protection, over-charge protection and over-use protection as additional battery safety measures.

Kanger’s newest EVOD PRO Starter Kit is the perfect kit for newer vapers and veteran vapers alike. If you’re waiting for the perfect opportunity to get into the vape scene, or would just like to have a compact and travel-friendly device, the EVOD PRO Starter Kit is all you need to get the ball rolling and start vaping in style.

 

Kanger EVOD Pro Starter Kit Features

  • Dimensions: 22 x 133mm (Not Including Drip Tip)
  • Tank Capacity: 4ml
  • Resistance: 0.15 ohm - 2.5 ohm
  • Battery: Single 18650 (Not Included)
  • Top Filling System 
  • Designed for a Mouth to Lung Vaping 
  • Compatible with CLOCC Atomizer Heads
  • Colors: Black, White, Red, Stainless Steel

Kanger EVOD Pro Starter Kit Content

  • 1 x Kanger EVOD PRO Vape Pen
  • 1 x CLOCC 1.0 ohm Atomizer Head (Pre-installed)
  • 1 x Micro USB Cable
  • 1 x User Manual 
 

 

Additional Information:

Kangertech’s original EVOD Starter Kit was one of the most popular and welcomed kits in the vape community, single-handedly paving the way for millions of smokers to finally make the transition from smoking to vaping. Kanger’s latest EVOD Pro Starter Kit introduces a massive upgrade to the EVOD platform, providing a significant increase in vapor production and battery power thanks to evolving vape technology and sub-ohm vaping potential.

Inside the EVOD Pro box, Kangertech includes a MicroUSB charge cable, a battery safety information cutout, an authenticity code for product verification and an instructional filling warning card. At the very bottom of the box is an EVOD Pro cutout that can be taken out to reveal the device’s operational instructions and mod specifications.

Unlike the previous EVOD kit, the EVOD Pro features an all-in-one construction with a non-removable atomizer. On top of the device is a 510 Delrin drip tip and two fixed, non-adjustable air holes. A MicroUSB charge port can be found on one side of the EVOD Pro, and located on the opposite side is the protruded firing button. At the bottom of the device is a threaded battery door that can be removed with a few simple turns to reveal the single 18650 battery bay (18650 battery NOT included). The battery door features built-in venting holes and a negative stainless steel connector pin that can be raised or lowered via threaded tab on the bottom. Lowering the connector pin is advised if you plan on traveling with the device in your pocket without removing the battery.

The EVOD Pro is an all-in-one, 4mL capacity, top-filling eGo styled vaporizer. The device houses a single 18650 battery and charges incredibly fast at 1A, promoting a direct current output of 4.2V. The EVOD Pro stands at 133mm tall and supports a minimum resistance of 0.15 ohms.

To fill this device, simply unscrew the top cap. Inside, you’ll find a 1.0 ohm Nichrome coil pre-installed. Before you fill the tank, be sure to prime your coil with 5-6 drops of E-Juice directly into the wicking ports on each side. If you do not know how to prime the coil correctly, be sure to check out our Tank Maintenance & Troubleshooting Tutorial in our Blogs section. Once the coil is primed, set it aside and begin filling the tank up to the MAX FILL line. Once the tank is full, thread the top cap back onto the tank and set it aside for about 5 minutes. This will allow the wick some time to fully saturate with e-juice and prevent a potentially dry hit.

All in all, the EVOD Pro is the perfect pocket-sized device for those long travels away from home. If you’re looking for a new, stylish and compact vaporizer that enables you to swap batteries on the fly while producing massive clouds of vapor, Kangertech’s EVOD Pro could be exactly what you’re looking for!

 

 

Vape Kits Disclaimer

SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.

TEMPERATURE CONTROL: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. MistHub is not responsible for any damage caused by the misuse and/or mishandling of temperature control devices. If you would like to learn more about Temperature Control, please check out our Temperature Control Tutorial!

BATTERIES: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. MistHub will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use or handling of a battery. By purchasing battery devices you acknowledge these risks and attest that you have sufficient understanding of the batteries you are purchasing to use and care for them properly.

WARRANTY: This device comes with a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Physical damage, water damage or evidence of tampering with the device will void the warranty. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty. Tanks, atomizers and coils are not covered under warranty. Please examine the devices upon delivery for any defects.

Customer Reviews

Based on 8 reviews Write a review

Kanger EVOD Pro Starter Kit Videos