XTAR PB2 Battery Charger For Electronic Cigarette Batteries
Revolutionizing the way you charge your smart devices, vaporizers, and box mods, is the highly efficient and portable XTAR PB2 Battery Charger. This versatile battery pack has a polished rubber paint finish and compact dimensions of 110mm x 51mm x 24mm to give it a comfortable feel. These dimensions, and a lightweight of 55g (without batteries), make this charger hand held and pocket-friendly so you can take it with you on the go. Although it has an extremely simple design, this battery charger is capable of carrying out a wide variety of extremely useful functions. By opening the magnetic battery access door, you can insert one 2500mAh 18650 battery and it will charge in one and a half hours. If you put two 2500mAh 18650 batteries in the charger, they will take approximately three hours to charge. An LED number display located above the removable battery access door will show you the percentage of which your battery is charged. This charger provides a balance between charging and discharging which increases each battery cells longevity. Utilizing quick-charging technology, the XTAR PB2 has a Micro-USB input and a USB output that allows you to externally charge devices. This charger can be used to charge smart phones such as the iPhone 7 plus, which can be fully charged in two hours. With a 0V activation function, this charger can revive over-discharged batteries with a 92% conversion rate. The XTAR PB2 has a DIY capacity of up to 7000mAh and patented safety technology to prevent any electric misfiring and accidents from occurring. If you have a batch of old 18650 batteries that don’t seem to hold a charge anymore, then pick up the XTAR PB2 Battery Charger and see if it can revive them and save you some money. Take the XTAR PB2 Battery Charger with you on any occasion and vape away knowing you have all the power you need to charge up when the time comes.
Features of XTAR PB2 Battery Charger For Electronic Cigarette Batteries
- Model: PB2
- Output: 2.1A USB charging
- Modes: Rapid charger or normal charger
- Auto Recharge: 3.9 ± 0.15V
- Over-Voltage Protection Over-Discharging Protection
- Short-Circuit Protection
- Reverse Polarity Protection
- Auto cut-off: 4.23 ± 0.05V
NOTE: Use special caution when handling batteries. Do not use any battery if visible signs of damage or stress is present. Always store and transport your batteries in a non-conductive container. Always charge batteries on a fire-proof surface. Never charge batteries unattended. Do not modify your batteries or chargers in any way, shape, or form. Use of batteries without a protection circuit is potentially hazardous. MistHub will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use or handling of a battery. By purchasing batteries you acknowledge these risks and attest that you have sufficient understanding of the batteries you are purchasing to use and care for them properly. Please note, we highly recommended to NOT allow the battery to discharge below 2.5V.