VOOPOO VINCI X 70W Vape Pod System Overview
The VOOPOO VINCI X 70W Vape Pod System combines the advantages of both pod devices and sub-ohm box mods to bring you a vaping experience like never before. Lightweight and portable like a pod device, yet still powerful and durable like a box mod, the VINCI X brings you the best of both worlds. This pod mod takes on a cuboid shape with rounded edges for optimal ergonomics, coated with a glossy finish that looks modern, sleek, and stylish from all angles. It fits comfortably in your pocket to take with you everywhere without weighing you down.
The VINCI X is equipped with a single replaceable 18650 battery (not included), high powered and long-lasting to reduce frequent charging. Easily insert and remove the battery using the threaded twist-off cap located at the bottom of the device.
The VINCI X integrates the GENE.AI Chipset which gives this mod an intelligent coil recognition ability. Insert your coil of choice and the VINCI X will automatically adjust the power settings, so the work is already done for you. This is a huge plus for those who are new to vaping and aren’t familiar with adjusting power, or for users who typically use pod devices that don’t require wattage settings. This feature also aids in preventing coil burnout, allowing you to get the most use out of each pod.
Along the chassis, you’ll find the firing/power button and a beautiful, clear, and legible 0.96in TFT screen which shows the battery life, current wattage, resistance, voltage, puff time in seconds, and puff counter. Simply adjust the wattage using the up and down buttons for your preferred power output, anywhere between 5 and 70W. At the top of the device is a comfortable mouthpiece designed wider than most pod devices and similar to the drip tip of a classic box mod to produce more airflow during inhalation.
Visibility ranks highest on VOOPOO’s list of key factors, which is why the VINCI X includes a Visible Inhalation feature. This innovative addition lets you check your vaping habits through a puff curve that displays accumulative puffs in real time on the screen. Your VINCI X stores records of these habits for up to two weeks.
The VINCI X pod cartridge holds up to 5.5mL of e-liquid and is compatible with all coils in the PnP Series. The included PnP-VM1 Mesh Coil has a 0.3 ohm resistance and is rated for use between 32 and 40W. The PnP-VM1 works best with regular freebase e-juice or e-liquid that contains 10mg or less of nicotine. This kit also comes with the PnP-VM4 Mesh Coil which has a 0.6 ohm resistance and is rated for use between 20 and 28W. The PnP-VM4 is recommended for nicotine salt e-liquid or e-liquid that contains 25mg or more of nicotine. Whether you prefer DTL (direct-to-lung) or MTL (mouth-to-lung) vaping, you are sure to find the perfect coil that checks off all the boxes for your needs.
Each VINCI X replacement pod incorporates a quick and easy filling method: simply slide out the pod from the device, lift the rubber plug on the side of the liquid chamber, and begin filling. Then firmly press the rubber plug back in, and slide the pod into your device. Additionally, the VINCI X enables you to change your vaping experience based on the insertion of the pod. Simply remove the pod, rotate it 180 degrees, and insert it again to activate the intuitive dual airflow system and achieve different airflow effects. This feature as well as the multitude of coil options make every vape with the VOOPOO VINCI X a special experience, incomparable to vaping on any other device.
Possibly VOOPOO’s most innovative creation to date, the VINCI X combines everything you love about lightweight pods and powerful box mods into one simple, sleek, and modern device. Features like its long-lasting battery and easy to read display screen are enough to replace both your sub-ohm device and pod device in no time. Its replaceable pod is compatible with a wide variety of PnP Coils to let you control your vaping experience, so you can get the perfect throat hit and the right balance of flavor and clouds. Experience the best of both worlds and begin, or continue, your vape journey with the VOOPOO VINCI X 70W Vape Pod System.
VOOPOO VINCI X 70W Vape Pod System Features
- Dimensions: 25.3 x 29.5 x 117mm (D x W x H)
- Construction: Zinc Alloy Chassis & PCTG Pod
- Powered By GENE.AI
- Output Wattage: 5 - 70W
- Output Voltage: 3.2 - 4.2V
- Resistance Range: 0.1 - 3.0ohm
- Display: 0.96" Color Screen
- Battery: 1 x 18650 (Not Included)
- Pod Capacity: 5.5ml
- Side Fill System
- Silicone Stopper
- Airflow: Dual Bottom Airflow System
- Additional Airflow Features
- Safety Features: Overtime Protection / Short-Circuit Protection / Overcharge Protection / Max Power Protection / Output Over Current Protection / Over Discharge Protection / Over-Temperature Protection / Reverse Polarity Protection
VOOPOO VINCI X 70W Vape Pod System Content
- 1 x Vinci X Vape Pod System
- 1 x Vinci Replacement Pod
- 1 x PnP-VM1 0.3 ohm Vape Coil
- 1 x PnP-VM4 0.6 ohm Vape Coil
- 1 x Micro USB Cable
- 1 x User Manual
- 1 x Warranty Card
- 1 x Chip Card
NOT FOR SALE TO MINORS: Vape products ordered from the MistHub Webstore is for ADULT USE ONLY. MistHub supports legislations and regulations preventing any purchase and use of our products by minors.
AGE VERIFICATION: Our web store utilizes strict age verification technology on any order to prevent minors from accessing and purchasing any vape products.