Vandy Vape Pulse 24 BF RDA Overview
The Vandy Vape Pulse 24 BF RDA is yet another outstanding product in a highly successful collaboration with Tony B. of the Vapor Trail Channel. Using the Pulse BF platform, the Pulse 24 has a massive build deck that allows for both single and dual coil configurations. The Stainless Steel chassis consists of a 24.4mm diameter and a 23mm height with two 3mm airflow holes on each side. These adjustable airflow holes act as slanted jet funnels that bring air directly to the coil for a nice, clean draw that’s exactly how you want it. Atop the Pulse 24 is a 17.5mm 810 wide-bore Ultem drip tip—but if that’s not your style, Vandy Vape has included a 16mm 810 wide-bore Delrin drip tip and an extra 510 adapter for good measure. The huge gold-plated post-less build deck features four recessed Philips screws and 2.5mm terminals that can accommodate for either one massive coil or two smaller coils. The build deck is equipped with a 7mm deep juice well that’s able of hold 2mL of e-juice at any given time from your favorite squonk mod. This deep juice well, along with the locking midsection where the airflow comes in, assures a clean vaping experience that supports the leak-resistant construction of the Pulse 24. For supreme versatility, this tank ships with a squonk pin and a traditional 510 contact pin so you’re able to use this RDA on any number of different devices.
Vandy Vape Pulse 24 BF RDA Features
- Diameter: 24mm
- Construction: 304 Stainless Steel
- Dual Terminal Post-less Style Build Deck
- Gold Plated Deck and Screws
- 7mm Deep Juice Well
- 2 Drip Tip Variations
- Direct Airflow Onco the Coil System
- Slanted Jet Funnel Adjustable Top Side Airflow Control
- 2 Airflow Jets on Each Side
- 24K Gold Plated 510 Connection
- PEEK Insulator
- Compatible with any Squonk Platform Mod
Vandy Vape Pulse 24 BF RDA Content
- 1 x Vandy Vape Pulse 24mm BF RDA
- 1 x 11mm ULTEM 810 Drip Tip
- 1 x 11mm Delrin 810 Drip Tip
- 1 x 510 Drip Tip Adapter
- 1 x Build Rod
- 1 T-Tool
- 1 x Set of Spare Parts
- User Manual
NOTE: This is a product for advanced users that have good knowledge and understanding of OHMS LAW, use a multimeter and are familiar with installation and safety requirements associated with these devices. MistHub is not responsible for any damage or injury caused by the misuse and/or mishandling of rebuildable devices.
NOT INCLUDED: Wick, wire and mesh may not be included and can be purchased separately.
WARRANTY: This device is NOT covered by our Warranty. Please examine the devices upon delivery for any manufacturer defects.