+
Holiday Vape Sale 2017
  • Rebuildables - Tigertek Morphe BF RDA

Tigertek Morphe BF RDA

SKU: ti-morp-bl   
Tigertek
29.99 34.99
In Stock
Earn 60 Points
Recommended products with your purchase:

Tigertek Morphe BF RDA Overview

The new Tigertek Morphe BF RDA is a high-performance rebuildable dripping atomizer intended for single coil builds that provides immense clouds and a rich flavor that’s on-par with dual coil builds. With a 32mm height and 24.5mm diameter, the tank sits comfortable on top of any standard box mod. The simple yet elegant Stainless Steel exterior features a machined ‘Morphe’ logo running vertically up the side and dual adjustable airflow slots for airflow control at its base. On top of this RDA is a low-profile wide-bore Doc 810 Delrin drip tip that sits just above a knurled top cap to provide fast and easy adjustments when fine-tuning your preferred airflow settings. Included in the package is a standard 810 drip tip for those who prefer a more centralized draw when taking those longer, drawn-out vapes. The top cap is secured in place by two tight o-rings that give this RDA a protected leak-proof design to keep the e-juice inside the tank where it belongs. On the inside of the Morphe RDA, Tigertek showcases their premiere Gold-plated clamp-style’d build deck and its near-bottomless juice well. These large cutouts measure 6mm deep and can store vast amounts of e-liquid to ensure that your wicks are always saturated with vape juice. To install the coil, push down on either of the projecting surfaces on the deck. This will expose two 6mm by 1.5mm slots that allow the coil leads to slide in from either side. Between these two clamps is a 7.5mm space that is equipped to handle a wide variety of single coil builds. If anything happens to the spring-loaded clamps, Tigertek includes extra springs that can be replaced via hex tool that’s included in the box. What’s more, the Gold-plated 510 connection at the base of the tank can be easily swapped out with the included BF pin, making this tank compatible with your favorite bottom-feeding squonk device. The Tigertek Morphe RDA offers huge potential for single coil builds and delivers an incredible direct-to-lung vaping experience that’s hard to put down!

 

Tigertek Morphe BF RDA Features

  • Diameter: 24 x 32mm (W x H)
  • Construction: Stainless Steel
  • Single Coil Configuration
  • Screwless Coil-Building Deck
  • 24K Gold Plated Connection
  • Adjustable Bottom Airflow Control
  • Direct Airflow Onto the Coil System
  • PEEK Insulator
  • 2 Drip Tip Variations
  • Interchangeable Springs
  • Compatible with any Squonk Platform Mod

Tigertek Morphe BF RDA Content

  • 1 x Tigertek Morphe BF RDA
  • 1 x Wide Bore Doc Drip Tip
  • 1 x 510 Delrin Drip Tip
  • 1 x 510 Drip Tip Adapter
  • 1 x BF Squonk Pin
  • 1 x Set of Space Parts
  • User Manual
 

Rebuildables Disclaimer

NOTE: This is a product for advanced users that have good knowledge and understanding of OHMS LAW, use a multimeter and are familiar with installation and safety requirements associated with these devices. MistHub is not responsible for any damage or injury caused by the misuse and/or mishandling of rebuildable devices.

NOT INCLUDED: Wick, wire and mesh may not be included and can be purchased separately.

MORE INFORMATION: For additional information, tips and advice please visit our Tutorial Section there are many useful guides, including: Vape Coil Building and OHMS Law and Vape Safety.

WARRANTY: This device is NOT covered by our Warranty. Please examine the devices upon delivery for any manufacturer defects.