SMOK Stick Prince Baby Kit with TFV12 Baby Prince Tank Overview
For your vaping convenience, SMOKtech has released the stylish new SMOK Stick Prince Baby Kit with TFV12 Baby Prince Tank. This ultra-portable pen-style device consists of a single button interface and a massive 4.5mL e-liquid capacity. The SMOK Stick Prince Baby Mod stands at 83mm tall with a diameter of 22mm and an extremely lightweight of 80.8g. The stealthy firing button on the mods chassis is uniquely shaped like a pentagon and is surrounded by an intelligent LED battery life indicator. While the mod maintains an operational voltage between 3.4-4.2V, the LED light around the firing button will flash fifteen times when the voltage goes lower than 3.3V. This means it’s time to charge the built-in 2000mAh battery using the Micro-USB port located on the back of the mod. Other safety features on the SMOK Stick Prince Baby Mod include an 8 second cut-off, short circuit protection, low voltage protection, and low resistance protection. Attached to the SMOK Stick Prince Baby Mod by a threaded 510 connection is the high performance TFV12 Baby Prince Tank. Made of superior Stainless Steel and durable Pyrex glass, the TFV12 Baby Prince Tank has dimensions of 53.7mm x 26mm with a lightweight of 55g. On top of the tank sits one of SMOKtech’s 810 Cobra style Resin drip tips with a defined appearance and special tactility. Below the drip tip is a push to open top filling method with a leak resistant button lock design to prevent vape juice from spilling while in use. This tank comes with a massively extended bulb glass tube with a large 4.5mL capacity as well as a standard glass tube with a 3mL capacity. Utilizing the bulb glass tube gives your kit a crowned look and increases the overall e-liquid capacity by 50%. To fill either of these glass reservoirs, simply push the button on the top cap then slide it open counterclockwise. Pre-installed inside the tank is the 0.15 ohm V8 Baby- Mesh Coil rated for use between 40-80W but provides the best vapor at 60-70W. This industry-leading Mesh coil material provides for a fast and evenly distributed heating process by enlarging the surface area. This kit also includes the V8 Baby-M2 0.25 ohm dual coil head for a cool and smooth taste. If you want to personalize your kit, this tank is compatible with V8 engine coils including the T12 Orange Light, Green Light, and Red Light atomizer heads. To adjust your airflow intake, the TFV12 Baby Prince Tank comes equipped with two massive bottom dual airflow slots that are fully closeable. If SMOKtech is your go-to company and you want a convenient device to take on the go, the pick up the SMOK Stick Prince Baby Kit with TFV12 Baby Prince Tank.
SMOK Stick Prince Baby Kit with TFV12 Baby Prince Tank Features
- Dimensions: 22 x 136.7mm
- Construction: Stainless Steel and Pyrex Glass
- Operating Voltage: 3.4V-4.2V
- Tank Capacity: 4.5ml
- Top Filling System with Hinge Lock
- Dual Adjustable Bottom Airflow Control
- 100% Pure Organic Cotton
- High Temperature Resistant
- Corrosion Resistant
- Unique Cobra Drip Tip
- Battery: 2000 mAh Internal Cell
- Intelligent LED Battery Life Indicator
- Micro USB Charging
- Short Circuit / Low Voltage / Low Resistance Protection
SMOK Stick Prince Baby Kit with TFV12 Baby Prince Tank Content
- 1 x Stick Prince Baby Battery
- 1 x TFV12 Baby Prince Sub-Ohm Tank
- 1 x 0.15 ohm V8 Baby-Mesh Vape Coil (Pre-installed)
- 1 x 0.25 ohm V8 Baby M2 Dual Vape Coil
- 1 x USB Charging Cable
- 1 x User Manual
- Spare Parts
Vape Kits Disclaimer
SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.
TEMPERATURE CONTROL: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. MistHub is not responsible for any damage caused by the misuse and/or mishandling of temperature control devices. If you would like to learn more about Temperature Control, please check out our Temperature Control Tutorial!
BATTERIES: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. MistHub will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use or handling of a battery. By purchasing battery devices you acknowledge these risks and attest that you have sufficient understanding of the batteries you are purchasing to use and care for them properly.
WARRANTY: This device comes with a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Physical damage, water damage or evidence of tampering with the device will void the warranty. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty. Tanks, atomizers and coils are not covered under warranty. Please examine the devices upon delivery for any defects.
NOT FOR SALE TO MINORS: Vape products ordered from the MistHub Webstore is for ADULT USE ONLY. MistHub supports legislations and regulations preventing any purchase and use of our products by minors.
AGE VERIFICATION: Our web store utilizes strict age verification technology on any order to prevent minors from accessing and purchasing any vape products.