Pioneer4You iPV2 Mini 70W Box Mod OverviewThe iPV Mini 2 is a miniature hand-held device that’s powered by a single 18650 battery (not included) and can handle up to 70W of raw power. That’s enough wattage to give many of these larger, high-powered mods a good run for their money! The iPV Mini 2 uses a 510 connection and offers a floating center pin. No matter what type of tank you prefer (RBA, Sub-Ohm, RBTA), the floating pin allows each tank to sit flush on top of the device. The iPV Mini 2 offers a bright visual operating system, giving the user an accurate representation of their current settings with the all-new Pioneer 4 You YiHi SX330V2C Chip. If all of this wasn’t enough, Pioneer 4 You includes an extensive list of safety features built-in to this device to help minimize the user’s risk of accidental firing. If you’re looking for a small, stylish, high powered device, Pioneer 4 You just gave us many reasons to check out their all-new iPV Mini 2!
Pioneer4You iPV2 Mini 70W Box Mod Features
- Dimensions: 23 x 44 x 95mm (D x W x H)
- Output Voltage Range: 3.6 V - 8.5 V
- Output Wattage Range: 7 W - 70 W
- Resistance: 0.2 ohm - 3.0 ohm
- YiHi SX330V2C Chip
- Floating Center Pin
- Low Voltage Protection
- Low Resistance Protection
- Reverse Battery Protection
- Battery: 1 x 18650 (Not Included)
- Colors: Black, Silver
Pioneer4You iPV2 Mini 70W Box Mod Content
- 1 x iPV2 Mini 70W Mod
- 1 x Micro USB Cable
- 1 x User Manual
Vape Mods Disclaimer
SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.
TEMPERATURE CONTROL: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. MistHub is not responsible for any damage caused by the misuse and/or mishandling of temperature control devices. If you would like to learn more about Temperature Control, please check out our Temperature Control Tutorial!
BATTERIES: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. MistHub will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use or handling of a battery. By purchasing battery devices you acknowledge these risks and attest that you have sufficient understanding of the batteries you are purchasing to use and care for them properly.
WARRANTY: This device comes with a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Physical damage, water damage or evidence of tampering with the device will void the warranty. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty. Tanks, atomizers and coils are not covered under warranty. Please examine the devices upon delivery for any defects.