Innokin Zenith MTL Tank by Phil Busardo and Dimitris Agarafiotis Overview
The Innokin Zenith MTL Tank by Phil Busardo and Dimitris Agarafiotis is a three way collaboration between some of the greatest minds in e-cigarette technology. This clearomizer was designed to give beginners an easy and intuitive way to make the switch from smoking to vaping. The 53mm x 24mm Zenith consists mostly of high-quality superior Stainless Steel and just enough Pyrex glass to see the current vape juice levels. Unlike other devices you may have seen, the Pyrex glass is not entirely replaceable, but instead, is embedded in the Stainless Steel frame for protection. With a 4mL e-liquid capacity, this tank features a convenient top-fill twist design that automatically shuts off the e-liquid flow to prevent flooding and gurgling. Simply twist the top cap as directed on the tank and pour your desired e-juice into the large, easily accessible fill port. Designed to provide a restricted lung hit, the Zenith comes with a pre-installed 4mm wide-bore 510 Delrin drip tip, as well as a 5mm wide-bore Delrin drip tip included with the package. These narrow drip tips sit on a raised platform that help in providing an extremely tight MTL draw. As part of the Zenith Coil Family, two thin, pre-built coil heads come with this tank and are both intended for lower wattages. These coils were designed with an intense focus on flavor rather than massive vapor production, and will help bring out only the best flavors from your favorite e-liquids. Pre-installed inside the Zenith MTL Tank is a 1.6 ohm Kanthal Coil that’s rated for wattages between 10 and 14W providing a nice and cool inhale that’s remarkably smooth with each and every vape. Also included inside the packaging is a 0.8 ohm Kanthal Coil that’s rated for wattages between 15 and 18W, providing a slightly warmer vape that maintains its trademark smooth inhale. Similar to many of Innokin’s previously released atomizer heads, the bottom of these coil heads have a nonadjustable Stainless 510 pin that provides direct contact from your mod to the coil. To replace the coil heads, simply remove the bottom adjustable airflow piece. This bottom piece consists of an airflow ring and five small air holes that can be closed one hole at a time to deliver your precise vaping airflow preferences. If you’re a beginner that’s just feeling out the scene, scoop up the Innokin Zenith MTL Tank by Phil Busardo and Dimitris Agarafiotis. These two, as well as the entire team over at Innokin, want nothing more than to provide you with a healthy alternative to an otherwise unhealthy lifestyle.
Innokin Zenith MTL Tank by Phil Busardo and Dimitris Agarafiotis Features
- Dimensions: 24.7 x 53.2mm (D x H)
- MTL Design (Mouth to Lung)
- Construction: Stainless Steel and Pyrex Glass
- Threaded Top Fill Cap Design
- Tank Capacity: 4ml
- Bottom Adjustable Airflow Control with 4 Settings
- Airlflow Fully Closeable
- Organic Cotton
- Two Dip Tip Variations
Innokin Zenith MTL Tank by Phil Busardo and Dimitris Agarafiotis Contents
- 1 x Innokin Zenith MTL Tank
- 1 x 0.8 ohm Kanthal Coil 15-18W
- 1 x 1.6 ohm Kanthal Coil 10-14W (Pre-Installed)
- 1 x 510 Delrin Drip Tip (4mm)
- 1 x 510 Delrin Drip Tip (5mm)
- 1 x Set of Muti-Color O-ring
- 1 x User Manual
Vape Tanks Disclaimer
SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.
WARRANTY: This device is NOT covered by our Warranty. Please examine the devices upon delivery for any manufacturer defects.