Innokin Proton Mini 120W Starter Kit with Ajax Tank
Innokin Proton Mini 120W Starter Kit with Ajax Tank Overview
Following up the original Innokin Proton, the all-new Innokin Proton Mini 120W Starter Kit with the Ajax Tank is portable, pocket-sized, and lightweight with all the advanced settings you love. Its sleek zinc-alloy chassis construction feels luxurious to the touch, while the mod itself fits comfortably in your hand. Paired with the Ajax Tank, you’ll love every vape from your Proton Mini.
The Innokin Proton Mini runs on a long-lasting, rechargeable 3400mAh battery with 2A quick-charging, so you can charge up fast via the Micro-USB charging port and get back to vaping. Its large and colorful 1.45 inch TFT screen is beautiful and easy to navigate with the small joystick just below the screen. Adjust the wattage anywhere between 6 and 120 watts by holding the joystick either to the left or right. You can also easily customize the screen by uploading a screensaver and changing the display to your color of choice.
The intuitive menu system includes advanced functions such as temperature control, custom TCR, custom wattage curve, bypass mode, and more. It also features three coil memory slots, so you can save your favorite settings without having to readjust with each coil you install. When you’ve installed a new coil and you’re ready for a vape, simply click the side-fire bar, and the advanced Proton chip-set will heat your coil almost instantly.
The Innokin Proton Mini Starter Kit includes the distinguished Ajax Sub-Ohm Tank, which features a 5mL e-juice capacity within a quartz crystal bubble glass piece. The tank's easy swivel top refill system lets you spend less time filling and more time vaping. Constructed with superior stainless steel, this tank also has a 510 wide bore resin drip tip along with a dual-slotted adjustable airflow control ring on the base of the tank.
The Ajax Tank is compatible with both the Ajax Coils, the Plex3D Matrix Coils, and the Plex3D Coils. The Proton Mini Starter Kit includes the 0.16 ohm Plex3D Matrix Coil, rated for use between 50 and 80W, as well as the 0.35 ohm Plex3D Coil, rated for use between 30 and 55W. These coils are easy to install in your Ajax using the plug ‘n play method: simply drop in your coil of choice, reattach the tank, and you’re ready to vape. While the Ajax operates incredibly with the Proton Mini, it has a threaded 510 connection to be used on other box mods.
Teamed up with the Ajax Sub-Ohm Tank, the Innokin Proton Mini is small but mighty, built to deliver amazing bursts of flavor and still portable to go with you everywhere. With a long-lasting internal rechargeable battery, a wide variety of settings, and a broad power output range, the Proton Mini can swiftly fulfill all your vaping needs. Pick up your sleek and stylish Innokin Proton Mini 120W Starter Kit with the Ajax Tank and enjoy hours of exquisite vaping.
Innokin Proton Mini 120W Starter Kit with Ajax Tank Features
- Dimensions: 30 x 45 x 120mm (D x W x H)
- Powered By Proton Chipset
- Output Mode: VW / VV / VT-SS / VT-Ti / VT-Ni / TCR
- Output Wattage: 6 - 120W
- Output Voltage: 3.7V Max
- Resistance Range: 0.1 - 3.5 ohm
- Temperature Range: 300 - 600°F (150 - 315°C)
- Display: 1.45" TFT
- Joystick Control
- Side-Firing Bar
- Battery: 3400mAh Internal Internal
- 35A Max Output Currency
- 2.0A Quick Charge
- Adjustable Cut-Off Time
- Tank Capacity: 5ml
- Slide-to-Open Top Fill System
- Airflow: Dual Bottom Airflow
- 510 Threading
- Safety Features: Over Heating Protection / Over-Discharge Protection / Short Circuit Protection / Adjustable Cut-Off Time
Innokin Proton Mini 120W Starter Kit with Ajax Tank Content
- 1 x Proton Mini Box Mod
- 1 x 5ml Ajax Tank
- 1 x 0.16 ohm Ajax Vape Coils (Pre-Installed)
- 1 x 0.35 ohm Ajax Vape Coils
- 1 x Replacement Glass Tube
- 1 x Spare O-Ring Set
- 1 x Micro USB Cable
- 1 x Quick Start Guide
- 1 x Warning Booklet