Innokin EZ WATT Starter Kit Overview
Designed with a user-friendly interface, the Innokin EZ WATT Starter Kit provides a quality vaping experience for beginners and makes a great addition to any veteran’s collection. While the low-wattage EZ WATT Mod is extremely efficient and easy to use, Innokin has cleverly paired it with the ergonomic Prism T20S Tank for a cloud-chasing and flavor enhancing MTL duo.
The sleek EZ WATT Mod has a height of 120mm, a width of 28mm, and a depth of 16mm with a simple two-button control face. The button near the top of the mod is not only the power and firing button, but it also acts as a battery life indicator. To turn on the device, click the power button three times and it will brightly light up one of three colors. Green means the battery is full, yellow means you have half battery life, and red means it’s time to charge up. The second button located just above the micro USB port can be easily accessed to adjust the power output of the device. Above the second button are three bright LEDs that indicate which power setting you are in. When the light is green, your output wattage is 13-14W. Blue lets you know you’re at 16-18W, and white is the most powerful at 30-35W. To adjust your wattage, you must hold both the power button and the select button simultaneously. The mod also arrives with several non-adjustable features as well, delivering an intuitive device that’s easy to use no matter what type of vaper you are. The EZ WATT features a maximum voltage of 7.5V and a current of 13.5A with a standby current of 100uA. The EZ WATT Mod is powered by an internal 1500mAh battery and will outlast similar devices due to the mods lower power-output.
The Prism T20S Tank has a 20mm diameter that sits perfectly flush on top of the EZ WATT Mod via threaded 510 connection. As seen in some previous Innokin tanks, the 510 threading on the Prism is an extension of the coil head. Pre-installed inside the tank is a tried-and-true Prism S 0.8 ohm coil head that’s rated for best use between 16-18W. Innokin also includes a Prism S 1.5 ohm coil head that’s rated at 13-14W for a more flavor-driven vaping experience. The Prism Tank houses a 2mL e-juice capacity and features a top-filling mechanism that can be easily accessed by removing the threaded 7mm Delrin drip tip. If you’re not a fan of this threaded-style mouthpiece, Innokin includes a secondary tapered drip tip in the box. The Prism tank is outfitted with two 3mm by 2mm non-adjustable airslots to deliver a clean and smooth draw, every time.
With its grand simplicity, the Innokin EZ WATT Starter Kit is just the device for you if you’re looking to get into the vaping lifestyle. With its Mouth-to-Lung style build, this starter kit offers great vapor production and unrelenting flavor for an all-around superb vaping experience.
Innokin EZ WATT Starter Kit Features
- Designed for MTL (Mouth To Lung) Vaping
- Dimensions: 16 x 28 x 120mm (D x W x H)
- Output Wattage: 13 - 35W
- Maximum Output Voltage: 7.5V
- Preset Power Modes: 13-14W / 16-18W / 30-35W
- Minimum Resistance: 0.2 ohm
- Battery: 1500 mAh Internal Cell
- Tri-Color LED Battery Life Indicator
- Tank Capacity: 2 mL
- Top Fill Design with Twist Cap
- Prism Dual Airflow Technology
- Dual Post Velocity Style Build Deck
Innokin EZ WATT Starter Kit Content
- 1 x Innokin EZ WATT Mod
- 1 x Innokin Prism T20-S Tank
- 1 x 0.8 ohm Prism S Vape Coil (Pre-installed)
- 1 x 1.5 ohm Prism S Vape Coil
- 1 x Extra Drip Tip
- 1 x Micro USB Cable
- 1 x Set of Spare O-Rings
- 1 x User Manual
Vape Kits Disclaimer
SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.
TEMPERATURE CONTROL: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. MistHub is not responsible for any damage caused by the misuse and/or mishandling of temperature control devices. If you would like to learn more about Temperature Control, please check out our Temperature Control Tutorial!
BATTERIES: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. MistHub will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use or handling of a battery. By purchasing battery devices you acknowledge these risks and attest that you have sufficient understanding of the batteries you are purchasing to use and care for them properly.
WARRANTY: This device comes with a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Physical damage, water damage or evidence of tampering with the device will void the warranty. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty. Tanks, atomizers and coils are not covered under warranty. Please examine the devices upon delivery for any defects.