Innokin CoolFire Mini Starter Kit with Zenith D22 Tank Kit Overview
Innokin has shrunk down their internationally best-selling CoolFire Mod for simplified on the go use with the Innokin Cool Fire Mini Starter Kit with Zenith D22 Tank. This ergonomic device has slim, handheld dimensions and an elegant design available in five metal finishes. The Cool Fire Mini Mod stands at 63mm tall enveloping a built-in 1300mAh battery that can be charged through the industry standard Micro-USB port. Along with a simple three-button operation, the Cool Fire Mini has a bright OLED screen that displays resistance, voltage, wattage, vaping time, and a battery life indicator. Making this device easy for beginners and veterans alike, there are only two output modes available- Wattage mode and Voltage mode. With a minimum clearomizer resistance of 0.2 ohm, you can adjust wattage from 6-40W and voltage from 3.0-7.5V. Other features of the Cool Fire Mini Mod include a maximum output current of 14.5A and a 100uA maximum standby current. Safety features of this device are over-discharge protection, over-heat protection, short-circuit protection, a low voltage warning, and atomizer recognition.
For this kit, Innokin has shrunk their popular Zenith Sub-Ohm Tank, which was originally designed by Phil Busardo and Dimitris Agarafiotis. This 22mm diameter tank is attached by Stainless Steel 510 threading around a Gold-plated spring-loaded contact pin. For this new design, the Zenith D22 Tank has an e-liquid capacity only slightly smaller than the original with a reservoir capable of holding up to 2mL of e-juice. Innokin has kept the same filling method, which involves simply unscrewing the top cap to pour in your favorite vape juices. Above the top cap is a 4mm wide-bore Delrin drip tip that assists with delivering a tight, restricted Mouth to Lung draw. Near the base of the tank is a bottom adjustable airflow ring that allows you to cover five small holes one at time and stops at fully closed for easy maintenance. Inside the tank is a unique chimney design that helps prevent flooding or gurgling while the device is in use. For this kit, Innokin has included two types of coils, one of them being the Innokin Plexus Z Coil for delivering a precise Mouth to Lung draw. The 0.5 ohm Plexus Z Coil is rated at 14-19W to provide a warmer vape at slightly higher wattages. The Kanthal coil wiring in this coil head is flattened into a mesh material to last longer, provide faster wicking, and eliminate hot spots. The other coil included with this kit is a 1.6 ohm Kanthal coil rated at slightly lower wattages of 10-14W for use with nicotine salt infused e-liquids. To switch out or replace these coils, simply remove the bottom adjustable airflow piece and use the threads provided on the coil heads. If you like low wattage vaping and you’re looking for a compact device to try out, then this may be the kit for you. The Innokin Cool Fire Mini Starter Kit with Zenith Tank is just the thing for beginners to make the switch and veterans to appreciate the revolution of low wattage vaping.
Innokin CoolFire Mini Starter Kit with Zenith D22 Tank Features
- Dimensions: 22 x 36 x 108mm (D x W x H)
- Output Mode: VW / VV
- Output Wattage: 6.0 - 40W
- Output Voltage: 3.0 - 7.5V
- Display: OLED Side Screen
- Battery: 1300 mAh Rechargeable Battery
- LED Battery Life Indicator
- Micro USB Charging
- Tank Capacity: 2ml/3ml
- Designed for MTL Vaping
- Easy Twist Top Fill System
- Airflow: Precision Bottom Adjustable Airflow
- Plexus Z Coil
- Chimney Design to Prevent Leaks and Reduce Noise
- Safety Features: Low Voltage Protection / Short Circuit Protection / Over Discharge Protection / Overheat Protection
Innokin CoolFire Mini Starter Kit with Zenith D22 Tank Content
- 1 x CoolFire Mini Mod
- 1 x Zenith D22 Vape Tank
- 1 x Plexus Z 0.5 ohm Vape Coil (Pre-Installed)
- 1 x Zenith KAL 1.6 ohm Vape Coil
- 1 x Spare O-Ring Set
- 1 x Extra Drip Tip
- 1 x Micro USB Cable
- 1 x User Manual
Vape Kits Disclaimer
SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.
TEMPERATURE CONTROL: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. MistHub is not responsible for any damage caused by the misuse and/or mishandling of temperature control devices. If you would like to learn more about Temperature Control, please check out our Temperature Control Tutorial!
BATTERIES: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. MistHub will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use or handling of a battery. By purchasing battery devices you acknowledge these risks and attest that you have sufficient understanding of the batteries you are purchasing to use and care for them properly.
WARRANTY: This device comes with a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Physical damage, water damage or evidence of tampering with the device will void the warranty. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty. Tanks, atomizers and coils are not covered under warranty. Please examine the devices upon delivery for any defects.