WARNING: This product contains nicotine. Nicotine is an addictive chemical.

We are shipping orders daily, please allow for slight delays with shipping carriers.

  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA
  • Innokin Ares-2 MTL RTA

Innokin Ares-2 MTL RTA

SKU: in-are2-bl   
$32.99 $44.99
Earn 66 Points


Please note this item is on a special sale and additional discount coupons will NOT apply during checkout.

Recommended products with your purchase:
Organic Cotton Innokin Ares-2 MTL RTA Top Filling Innokin Ares-2 MTL RTA

Innokin Ares-2 MTL RTA Overview

The Innokin Ares-2 MTL RTA (rebuildable tank atomizer) has everything you need to create the perfect mouth-to-lung vaping experience. With a fixed gold-plated 510 connection, the Ares-2 MTL RTA is compatible with a wide variety of mods available now.

The Ares-2 has a 24mm diameter and holds up to 4mL of e-liquid, so you can spend less time filling and more time vaping. This tank also has a child safety locking top cap incorporated in the pre-installed 510 drip tip, which has a small nub that locks the top cap in place to prevent it from opening haphazardly. To reveal the fill port, remove the drip tip and slide the top cap to the side. When you’re done filling, push the cap back and replace the drip tip to lock it securely. Within the Ares-2 is a carefully crafted flavor bell designed to condense the vapor in order to provide a smooth, flavorful MTL vape every time. At the base of the tank is a dual-slotted adjustable airflow ring, with one slot much larger than the other 0.8mm slot, and five differently sized air inlets, so you have full control over your desired throat hit.

Included with the Ares-2 is a coil winding tool, a coiling rod, extra flat head screws, a two-in-one flat head/Phillips head screwdriver, Japanese organic cotton, two pre-built 1 ohm Kanthal coils, 1m 26g Kanthal wire, extra O-rings, an extra top fill gasket, a spare tinted Pyrex glass piece, and a spare drip tip. With the Ares-2, you have all the tools required to create an ideal MTL vape.

Constructed with superior stainless steel, the build deck makes it easy to install the coil and cotton, with two posts for attaching the coil leads to each respective terminal, as well as two barriers for folding the cotton over on either side and protecting the airflow. Simply place the coil in the deck, screw in the ends of the coil, cut the ends with wire cutters, then insert the cotton within the coil, placing the ends inside the slots on either side of the deck. Next, saturate the coil and cotton with your favorite e-liquid, and screw the tank section onto the build deck. Finally, fill your tank with e-liquid and allow time for complete saturation before vaping.

The all-new Cross Air Flow Control (CAFC) gives you the ability to adjust the velocity and air pattern beneath the coil without changing any parts or removing the coil. Simply use the flat head screwdriver to swivel the airflow slot in the center of the build deck to establish the perfect puff.

Boasting a brand new airflow control system, a user-friendly build deck, and a lock-in-place fill port, the Ares-2 MTL RTA checks off all the boxes for your vaping needs. Upgrade your vaping game and experience the freedom of high-quality customization with the Innokin Ares-2 MTL RTA.


Innokin Ares-2 MTL RTA Features

  • Diameter: 24mm
  • Construction: 304 Stainless Steel and Polycarbonate
  • Tank Capacity: 4ml
  • Two Post Build Deck
  • Single Coil Design
  • 6mm x 3mm Terminals
  • Top/Side Mounted Phillips Head Screws
  • PEEK Insulation
  • Top Slide to Fill System
  • Single Large Fill Port
  • High Capacity Tank Reservoir
  • Airflow: Adjustable Single Bottom Airflow
  • Five Airflow Settings
  • Derlin Drip Tip
  • 510 Gold Plated Connection

Innokin Ares-2 MTL RTA Content

  • 1 x Ares 2  D24 RTA Tank
  • 2 x Spare Pre-built Coils
  • 1 x Cotton & Wire Set
  • 1 x Spare Screw Set (Flathead)
  • 1 x Phil's Build Tool
  • 1 x Dimi's Build Tool
  • 1 x Screwdriver Set
  • 1 x Spare Glass Tube
  • 1 x Spare O-Ring Set
  • 1 x Spare Drip Tip
  • 1 x Vape Band
  • 1 x Quick Start Guide

Vape Tanks Disclaimer

SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.

WARRANTY: This device is NOT covered by our Warranty. Please examine the devices upon delivery for any manufacturer defects.

NOT FOR SALE TO MINORS: Vape products ordered from the MistHub Webstore is for ADULT USE ONLY. MistHub supports legislations and regulations preventing any purchase and use of our products by minors.

AGE VERIFICATION: Our web store utilizes strict age verification technology on any order to prevent minors from accessing and purchasing any vape products.

Innokin Ares-2 MTL RTA Reviews

Customer Reviews

Based on 1 review Write a review