Dead Rabbit SQ RDA by Hellvape and Heathen Overview
Improved from the original Dead Rabbit RDA and designed with more versatility is the new Dead Rabbit SQ RDA by Hellvape and Heathen. This renovated 22mm diameter squonk atomizer exhibits the iconic Dead Rabbit logo, now with a squonk pin shooting juice between the rabbit’s ears. Made of high-grade Stainless Steel, this RDA features knurling at the edges around the mouthpiece for easy airflow adjustment. The airflow provides several unique options with the airslots located high up on the chassis to minimize potential leakage. One airflow option consists of two large air holes that can be fully opened, fully closed, or anywhere in between. For a more restricted draw, you could keep two of the 1mm airholes open, and if you wanted a significantly restricted draw, you could leave only one of the airholes open. The airflow is channeled diagonally down into the deck, placing incoming air directly underneath the coils. The Dead Rabbit SQ has an elevated two-post build deck for single coil builds and a deep juice well that's capable of holding plenty of your favorite vape juice. Thanks to the Dead Rabbit SQ’s elevated posts and their larger 2.5mm post holes, cutting your coil leads has never easier. The leads are held in place by your choice of either slotted or hex side-mounted screws to preserve your build. The build deck has a Gold-plated positive lead for better conductivity and is secured firmly in place to the rest of the RDA by double o-rings. To further secure the build deck portion to the rest of the atomizer, the Dead Rabbit SQ has an ergonomic barrel locking system. For comfort and convenience, Hellvape and Heathen has included three drip tip options: A colorful 9mm Wide-bore 810 Resin Drip Tip, a taller 810 Wide-bore Drip Tip, and a 4mm MTL 510 Drip Tip that can be used with the included Stainless Steel 510 drip tip adapter. The Dead Rabbit SQ arrives squonk-friendly with a hollowed-out squonk pin already pre-installed. If you don’t have a squonker mod, Hellvape and Heathen have included a Gold-plated 510 pin with PEEK insulation for use with compatible box mods. If you were a fan of the original Dead Rabbit RDA, or are looking for a new and exciting rebuildable atomizer that accelerates the coil building/setting process, the Dead Rabbit SQ RDA by Hellvape and Heathen is a flavor-driven atomizer that’s stylish and intuitive.
Dead Rabbit SQ RDA by Hellvape and Heathen Features
- Diameter: 22mm
- Construction: 304 Stainless Steel
- Slide In Top Coil Deck
- Top Terminal Two Post Build Deck
- Single Coil Configuration
- Gold Plated Positive Post
- 5mm Deep Juice Well
- Slotted Or Hex Head Post Screw Options
- 7mm x 2mm Duel Top Side Diagonal Adjustable Airflow
- Adjustable Semi Restricted And Full Restricted MTL Airflow Options
- Gold Plated Protruding Slotted 510 Connection
- PEEK Insulation
- Compatible With Any Squonk Platform Mod
Dead Rabbit SQ RDA by Hellvape and Heathen Content
- 1 x Dead Rabbit SQ RDA
- 1 x Delrin 810 Drip Tip
- 1 x Delrin MTL 510 Drip Tip
- 1 x Stainless Steel 510 adapter
- 1 x Squonk Ready Center Pin
- 1 x Set Of Spare Parts
- 1 x Slotted Screwdriver
- 1 x Oring
- 2 x Allen Keys
- 4 x Slotted And 4 Hex Screws
NOTE: This is a product for advanced users that have good knowledge and understanding of OHMS LAW, use a multimeter and are familiar with installation and safety requirements associated with these devices. MistHub is not responsible for any damage or injury caused by the misuse and/or mishandling of rebuildable devices.
NOT INCLUDED: Wick, wire and mesh may not be included and can be purchased separately.
WARRANTY: This device is NOT covered by our Warranty. Please examine the devices upon delivery for any manufacturer defects.