SMOK Priv V8 Kit with TFV8 Baby Tank Overview
The SMOK Priv V8 Kit with TFV8 Baby Tank is designed for those who are seeking the thrill and simplicity of a Smart Mechanical Style’d Output. The Priv V8 mod consists of durable Zinc Alloy construction in a 24.5mm x 34mm x 80mm frame that weighs 83.3g. Powered by a single high-drain 18650 battery (sold separately), the mod configures the power-output through a smart voltage based method. After loading in your battery through the hinged battery cover on the bottom of the mod, the device can be powered on by pressing the long side-mounted squeeze-to-fire firing bar five times. This single-button interface activates the output-voltage based on the current state of the battery.
Located at the top of the device for easy viewing is a single LED that clearly displays whether or not the Priv V8 is powered on and everything is working properly. A second LED located near the base of the mod will light up when the device is being charged via micro USB port to let you know the mod is currently charging. The voltage output stays between 3.4V and 4.2V, giving a maximum output wattage of 60W. As time goes on and you continue to vape, the 60W max-output will slowly start to decrease with your battery life. The lower your battery life, the lower your wattage-output is going to be. The Priv V8 Mod maintains a standby current of less-than 200uA and a charging current of 600mA-700mA.
To make this Kit even more attractive, SMOK has loaded this setup with all the most important safety features with their full protection suite. The suite consists of low voltage protection, low resistance protection, short circuit protection, reverse battery protection, overshoot protection, and an eight-second automatic cut-off.
Attached to the Priv V8 Mod via Stainless threaded 510 connection is the TFV8 Baby Beast Tank. This tank has a light weight of 47g, measuring 53mm tall and 22mm wide, which allows the tank to sit perfectly flush with the Priv V8 Mod. The Baby Beast is made of reinforced Pyrex glass and anodized superior Stainless Steel that makes this tank incredibly easy to clean. On top of this frame is an elongated 8.5mm heat-resistant 510 Delrin drip tip can be easily swapped out with any of your other favorite custom 510 drip tips. The base of the tank features dual-adjustable air slots that measure 11mm x 1mm and are equipped with stopping points to prevent the ring from spinning and help make it easier to disassemble the tank. With the TFV8 Baby Beast, SMOK has kept with their popular tried-and-true hinge-lock top filling system. Simply twist open the cap and pour your e-liquid right into the 3mL capacity reservoir.
Utilizing the Baby Turbo Engines coil structure, the Baby Beast has a pre-installed Baby M2 Core 0.25 ohm dual coil, and a second replacement M2 atomizer head. This coil structure was built exclusively for a 3.7V direct output and is rated for wattages between 30 to 50W. The 0.25 ohm M2 head consists of a parallel Kanthal coil that’s been wrapped in organic Japanese Cotton and features four large wicking ports for ultra-fast wicking, no matter how often you vape.
The SMOK Priv V8 Kit with TFV8 Baby Tank delivers unrelenting power in a small and compact device that’s perfect for any occasion. Simply slip this kit right into your pocket and take it with you anywhere you go!
SMOK Priv V8 Kit with TFV8 Baby Tank Features
- Dimensions: 34 x 80 x 123mm
- Construction: Zinc Alloy and Pyrex Glass
- Operating Voltage: 3.4V-4.2V
- Tank Capacity: 3ml
- Top Filling System with Hinge Lock
- Dual Adjustable Airflow Control
- 100% Pure Organic Cotton
- Delrin Drip Tip
- Battery: 1 x 18650 (Not Included)
- Battery Life Indicator
- Micro USB Charging
- Protection: Short Circuit / Reverse Battery / Low Resistance
- 8 Second Cut-Off
SMOK Priv V8 Kit with TFV8 Baby Tank Content
- 1 x Priv V8 Mod
- 1 x TFV8 Baby Tank
- 1 x 0.25 ohm v8-M2 Dual Vape Coil(Pre-installed)
- 1 x 0.25 ohm v8-M2 Dual Vape Coil
- 1 x Replacement Glass Tube
- 1 x USB Charging Cable
- 1 x User Manual
- Spare Parts
Vape Kits Disclaimer
SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.
TEMPERATURE CONTROL: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. MistHub is not responsible for any damage caused by the misuse and/or mishandling of temperature control devices. If you would like to learn more about Temperature Control, please check out our Temperature Control Tutorial!
BATTERIES: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. MistHub will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use or handling of a battery. By purchasing battery devices you acknowledge these risks and attest that you have sufficient understanding of the batteries you are purchasing to use and care for them properly.
WARRANTY: This device comes with a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Physical damage, water damage or evidence of tampering with the device will void the warranty. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty. Tanks, atomizers and coils are not covered under warranty. Please examine the devices upon delivery for any defects.
NOT FOR SALE TO MINORS: Vape products ordered from the MistHub Webstore is for ADULT USE ONLY. MistHub supports legislations and regulations preventing any purchase and use of our products by minors.
AGE VERIFICATION: Our web store utilizes strict age verification technology on any order to prevent minors from accessing and purchasing any vape products.