Innokin Cool Fire IV TC100W iSub V Kit Overview
Innokin is setting the new standard for PV’s all around the world. Introducing the Cool Fire IV TC 100W Temperature Control Vaping System. The Cool Fire IV TC 100W is powered by the Ultra-Fast advanced Aethon chipset with 100W of pure power with ClearWave noise cancellation technology. This device can be vaped with Nickel, Stainless Steel or Titanium coils and supports an UltraFast response time of 0.2 seconds from click to vapor. The Precise Coil Resistance Reading perfectly measures the coils resistance all the way down to .00000 (that’s a hundred-thousandth) to give you the most accurate resistance reading on the market today. The Cool Fire IV comes equipped with high-quality Stainless Steel threading that supports a spring loaded gold plated connector pin, creating unmatched conductivity for a truly magnificent vape. This device has an internal 3300 mAh battery that is charged through a 2AMP microUSB Quick Charge port for incredibly fast charging (and can also be vaped during charging). If you’re looking for a new TC Device that supports the latest and greatest state-of-the-art vaping technology, the Cool Fire IV TC100 will not disappoint.
Combined with this incredible device is the iSub V tank. The iSub promotes a Stainless Steel/Pyrex Glass design, providing a sleek and minimal construction that’s pleasing to the eye. This top-filling 3mL capacity tank stands at 2” tall (including drip tip and threads) by 7/8” wide. The clear Pyrex glass makes monitoring the current E-Juice levels simple and cleaning even easier. The iSub’s dual adjustable airflow system supports wide airflow for deeper lung hits. If you prefer a tighter draw, simply turn the adjustable airflow ring to your exact preference and experience the perfect mouth-to-lung vape. This tank also supports a no-spill coil swap design so you can change the coils without worrying about losing the E-Juice in the tank in the process. The iSub V Sub-Ohm tank provides two SS316L 0.5 ohm Atomizer Heads and can be used in both Variable Wattage and Temperature Control. Innokin created the iSub V Tank to work with any of the iSub Coils previously on the market today, allowing you to use your previous iSub coil heads with your new iSub V. The all-new iSub V makes vaping simple again with its top fill-construction and no spill coil swap system.
The Cool Fire IV TC100W iSub V Starter Kit is a beautiful work of supreme craftsmanship that cannot be compared to anything on the market today. If you’re looking for a new setup you’ve come to the right place.
Innokin Cool Fire IV TC100W iSub V Kit Features
- Dimensions: 24 x 35 x 136mm
- Output Mode: VT-Ti / VT-Ni / SS / VW
- Output Wattage: 6 - 100W
- Minimum Resistance: 0.1 ohm
- Temperature Range: 150 - 315C / 300 - 600F
- Battery: 3300 mAh
- Temperature Control Dry Hit Prevention & Quick Calibration
- Ramp up 0.2 seconds from Click to Vapor
- VDC Power Output with ClearWave Noise Cancellation
- Precise Coil Resistance Reading (.00000)
- 2AMP microUSB Quick Charging
Innokin Cool Fire IV TC100W iSub V Kit Content
- 1 x Innokin Coolfire IV TC Battery
- 1 x Innokin iSub V Vape Tank
- 1 x iSub SS316L BVC 0.5ohm Vape Coil (Pre-installed)
- 1 x iSub KAL BVC 0.5ohm Vape Coil
- 1 x Micro USB Charging Cable
- 1 x Set of Spare O-Rings
- 1 x Innokin Vape Band
- 1 x Spare Drip Tip
- 1 x User Manual
Innokin’s compact Coolfire 4 Starter Kit is a master crafted combination of the 100W TC Coolfire 4 and the iSub V Sub-Ohm tank.
Inside the box, Innokin includes a MicroUSB cable, replacement o-rings, an extra mouthpiece, a replacement 0.5 ohm Stainless Steel coil head, a stylish Innokin vape band and some Innokin stickers.
The Coolfire 4 supports a curved shape and is ergonomically pleasing to hold in the hand. This pocket-friendly Temperature Control device is powered by the ultra-fast Aython Chipset and features 100W of raw power with ClearWave noise cancellation technology.
At the top of the device is a Stainless threaded 510 connection that houses a spring-loaded gold plated contact pin for increased conductivity and fast ramp-up times. On the front face of the Coolfire 4 is a fire button, large OLED screen, two regulatory buttons and a MicroUSB port that can be used for both firmware upgrades and charging the device. Battery venting holes have been constructed into the sides of the mod, providing ample battery venting options if the situation arises.
The Coolfire 4 features a large, internal (non-removable) 3300 mAh battery that charges incredibly fast at a consistent 2A, significantly reducing the amount of time it takes to reach a full charge, and supports a minimum operational resistance as low as 0.1 ohms. Innokin also equipped the Coolfire 4 with a bright status LED that sits behind the fire button, providing an accurate representation of the battery’s current charge and informing the user when it’s time to charge the device. This device supports all of the most popular Temperature Control wires (Nickel, Titanium, Stainless Steel) and can be fired anywhere between 300-600° Fahrenheit.
The iSub V is a powerful Sub-Ohm tank that’s constructed out of Stainless Steel and Pyrex Glass. This powerful 3mL top-filling tank features a “no spill coil swap system,” effectively enabling the user to replace the atomizer head, no matter how e-juice is inside the tank. The very top of the iSub V features a heat-resistant delrin drip tip that dissipates heat during those hotter vapes. The base of the iSub V is fitted with an adjustable airflow control ring, allowing the user to alternate between a tight Mouth-to-Lung draw or a less restricted Direct-to-Lung inhale. Pre-installed inside the iSub V is a 0.5 Ohm Stainless Steel atomizer head that can be used in both Wattage Mode and Temperature Control Mode. Each pre-built iSub V replacement coil head features a pre-installed wire mesh that effectively alleviates spit-back, and is wicked with 100% Pure Organic Cotton for a consistent, top-shelf flavor experience.
Innokin’s new Coolfire 4 kit is a high-powered temp control setup that boasts the latest and greatest in vaping technology. The long-lasting 3300 mAh battery will outlast many mods on the market today, and the 2A quick-charge makes this device all the more appealing. This compact device takes revolutionary step forward for the vaping community and will most certainly raise vaper’s expectations for kits as we head into the future.
Vape Kits Disclaimer
SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.
TEMPERATURE CONTROL: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. MistHub is not responsible for any damage caused by the misuse and/or mishandling of temperature control devices. If you would like to learn more about Temperature Control, please check out our Temperature Control Tutorial!
BATTERIES: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. MistHub will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use or handling of a battery. By purchasing battery devices you acknowledge these risks and attest that you have sufficient understanding of the batteries you are purchasing to use and care for them properly.
WARRANTY: This device comes with a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Physical damage, water damage or evidence of tampering with the device will void the warranty. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty. Tanks, atomizers and coils are not covered under warranty. Please examine the devices upon delivery for any defects.
NOT FOR SALE TO MINORS: Vape products ordered from the MistHub Webstore is for ADULT USE ONLY. MistHub supports legislations and regulations preventing any purchase and use of our products by minors.
AGE VERIFICATION: Our web store utilizes strict age verification technology on any order to prevent minors from accessing and purchasing any vape products.