Eleaf iStick Mix 160W Starter Kit with ELLO POP Overview
The Eleaf iStick Mix 160W Starter Kit with ELLO POP Tank creates a stylish, ergonomic duo with uniquely designed double sided Resin panels on the outside and all the technology you need on the inside. Altogether, this kit has compact dimensions of 52mm x 27mm x 134.5mm and a heavy duty weight of 209.5g. The smooth, multi-colored panels consist of IN Molding Labels to create a high definition appearance as well as a comfortable, curved hand feel. Keeping those unique designs clean and striking, Eleaf has place an OLED display screen on the side of the Mix Mod sandwiched between an oversized firing button and two adjustment buttons. Also along the exterior of this device is a 3.0 Micro-USB port that has a 2.5A maximum charging current, which can charge your batteries in less than 1.5 hours. The Eleaf iStick Mix is powered by dual 18650 batteries (not included) that are charged evenly thanks to the innovative Avatar Chip within this powerful device. The Avatar Chip provides a rapid firing time as well as safety protections such as over-charge protection, over-discharge protection, over-current protection, reverse polarity protection, over ten second cut-off, and short circuit protection. The Eleaf iStick Mix has Variable Wattage from 1-160W, Temperature Control of 200-600F (100-315C) with Ni, Ti, and SS heating elements, and three all-encompassing memory modes.
Attached to the Eleaf iStick Mix 160W Mod by a threaded 510 connection is the Eleaf ELLO POP Sub-Ohm Tank. On top of the tank is a comfortable 810 wide-bore Resin drip tip that matches the unique coloration of your mod. From top to bottom the ELLO POP has a height of 56.5mm while the width ranges from 26.5mm to 28mm depending on which e-liquid reservoir you choose to install on your tank. The 26.5mm standard glass tube has a TPD-compliant 2Ml E-liquid capacity while the 28mm extended bubble glass tube has a massive 6.5ml e-liquid capacity. Unique Silicone rings around the glass tube not only protect your glass reservoir but also add to the overall outlook of your kit. The ELLO POP Tank has a childproof top cap alongside a convenient top-filling method with a slide to open design and a large filling port. Simply lift up the entire top cap in order to slide it over, then pour in your favorite vape juice- being sure to let your coil be fully saturated before use. Included with this kit is the HW-M2 0.2 ohm coil with Kanthal heating material in a mesh design for rapid heat distribution at 40-90W. Eleaf has also included the HW-N2 0.2 ohm coil with Kanthal heating material in more of a net-like design that is also rated for best use at 40-90W. These coils are leakage proof and come equipped with self-cleaning technology to keep each draw from your tank as fresh as the first one. With supremely enhanced flavor and massive cloud production, you can control your airflow through dual bottom adjustable airflow slots.
Eleaf iStick Mix 160W Starter Kit with ELLO POP Features
- Dimensions: 27.0 x 52.0 x 134.5mm (D x W x H)
- Unique Curved Design
- Weight: 209.5g
- Powered By Avatar Chipset
- Output Wattage:0 - 160W
- Resistance Range: 0.05 - 3.0 ohm
- Temperature Range: 200 - 600°F (100 - 315°C)
- Display: OLED Screen
- Battery: 2 x 18650 External (Not Included)
- Tank Capacity: 6.5ml
- Lift-and-Fill Top Filling
- Airflow: Dual Bottom
- Safety Features: Over-Charge Protection / Over-Discharge Protection / Over-Current Protection / 10s Cut-Off / Short Circuit Protection / Reverse Polarity Protection
Eleaf iStick Mix 160W Starter Kit with ELLO POP Content
- 1 x iStick Mix Box Mod
- 1 x ELLO POP Vape Tank
- 1 x HW-M2 0.2 ohm Vape Coil (Pre-Installed)
- 1 x HW-N2 0.2 ohm Vape Coil
- 1 x QC3.0 USB Cable
- 1 x User Manual
- 1 x Spare Parts
Vape Kits Disclaimer
SUB-OHM: Some devices might come with sub-ohm resistance coils. Extra safety precautions should be practiced when using a sub ohm device. Sub-ohm coils will only work on a device capable of firing sub ohm atomizers and coils. You must also ensure that your batteries can handle sub ohm atomizers and coils. Improper use can lead to damage or injury. MistHub is not responsible for any damage caused by the misuse and/or mishandling of sub-ohm devices. Check out our Tutorial Section where you can learn more about the different kinds of devices and tips on how to use them safely.
TEMPERATURE CONTROL: Temperature control devices require the use of nickel, titanium or stainless steel wire. Temperature control coils are designed specifically for use only with devices equipped with circuit boards capable of controlling coil temperature. Do NOT use temperature control coils with any device that is not equipped to handle temperature control. MistHub is not responsible for any damage caused by the misuse and/or mishandling of temperature control devices. If you would like to learn more about Temperature Control, please check out our Temperature Control Tutorial!
BATTERIES: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. MistHub will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use or handling of a battery. By purchasing battery devices you acknowledge these risks and attest that you have sufficient understanding of the batteries you are purchasing to use and care for them properly.
WARRANTY: This device comes with a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Physical damage, water damage or evidence of tampering with the device will void the warranty. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty. Tanks, atomizers and coils are not covered under warranty. Please examine the devices upon delivery for any defects.
NOT FOR SALE TO MINORS: Vape products ordered from the MistHub Webstore is for ADULT USE ONLY. MistHub supports legislations and regulations preventing any purchase and use of our products by minors.
AGE VERIFICATION: Our web store utilizes strict age verification technology on any order to prevent minors from accessing and purchasing any vape products.